for free EXPERT ADVICE Contact Us toll-free 0800-LADDER (523337) OR 0800-CASTOR (227867)
SA Ladder delivers country wide around South Africa. ENQUIRE NOW! VIEW LATEST SPECIALS

Access Equipment

Range

Aluminium Ladderstage

Ladderstage

Aluminium Ladderstage - SA Ladder

Overview

  • Provides a 2,4m walkway with guardrails, to reach work heights between 2,9m and 5,2m
  • One hand instant height adjustment in 0,3m rises
  • Brake lock castors
  • One man can erect the ladderstage in five minutes and roll it anywhere.Can be manufactured to fit through a standard single door upon request.
  • Packs flat for transport
  • Load rate: 2 men plus hand tools

Model Range

Closed Height Extended Height Length Width Weight
2.28m 3.31m 2.1m 0.9m 40kg

 

Extra Features

Assembly Instructions

Upon receipt of your ladderstage the following instructions need to be followed to assemble the unit:

  1. Take one of the ladders (left) and fasten the brake on the castors.
  2. Repeat on the other ladder (right).
  3. Take two horizontal braces and place at the bottom of the left hand ladder section. Insert bolt through hole in ladder and fasten the wing nut.
  4. Repeat on the right hand ladder.
  5. Take the diagonal brace, attach to bottom of left hand ladder using the common bolt and wing nut.
  6. Attach the other end of the diagonal to the hole at second top rung on right hand ladder.
  7. The inverted diagonals (attached to fly section) may be attached to the pull-up bar in the centre of the unit with bolt and wing nut.
  8. Place the platform in position.
  9. Attach the horizontal (guard rails) at each side on the top of the ladder and fasten with a wing nut.
  10. Grip the pull-up bar firmly and lift the platform to the required height.
  11. Run the ladder lock past the required height rung and lower in order for the lock to locate properly.
  12. You may now use the ladderstage.